Acard AEC-6896/S Drivers for Windows 10

Download Now
Acard AEC-6896/S Driver

Acard AEC/S Free Driver Download for Linux. World's most popular driver download site. C Seagate C IBM C Maxtor C Western Digital For the newest compatibility, please visit 9 AECS/ Manual Chapter 3 BIOS Setup. View and Download Acard AECS user manual online. AEC is particularly designed for DMA hard drive, and has been fully tested with the hard.

Acard AEC-6896/S Driver Download

Type: Driver
187 (3.31)
Downloads: 1187
File Size: 11.69Mb
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* [*Free Registration Required]

Download Now
Acard AEC-6896/S Driver


Connect the power cord to Acard AEC-6896/S hard drive. The serial ATA cable is used to transfer data of very high frequency. It is suggested not to connect and disconnect it too often, because the connectors are easily damaged. Meanwhile at the bottom of the screen, you can see the model numbers of hard drives connected to the channels, the capacity, the RAID status and class.

Set according to the prompt window. Please refer to 3. Its Acard AEC-6896/S is easy for operation. Please refer to Chapter 5.

You can set a new array from Array 0 to 7. The number is simply for the system identification.

Acard AEC-6896/S rebooting, the system will assign the newly set array a smaller number. It begins with Array 0. Please see 3. The rebuilding time depends on the size of RAID. Beware that the data and the partitions will be erased. If your hard drives are ATA ones, you are strongly recommended to Acard AEC-6896/S the disk jumper as CS cable selection.

The hardware setting related to each RAID mode is briefly described below.

Please refer to Chapter 5 and Appendix A. Green highlighted items can be selected but purple ones cannot.

Acard AEC-6896/S Windows 8

Purple items are used in another array. Figure 3.

Acard Aecs Driver Download Version

That depends on the size of files the array intends to access in order to use the hard drives fully. For example, you can select a larger stripe size for the array whose image files Acard AEC-6896/S will frequently access. But if not, please choose one of them as the source hard drive label is disk0 or Acard AEC-6896/Sand copy the data from the source one to another. Figure When one of the hard drives in mirror array is damaged, you Acard AEC-6896/S to power off, then change the bad hard drive.

Please notice that if you connect the newly removed hard drive back to AEC, in the channel display area at the bottom of BIOS screen, the hard drive will be added to a new array its number is different from the original mirror array.

Besides, you have to select stripe block size, too. Data will be automatically saved into Acard AEC-6896/S next hard drive when the present hard drive is used up. The second method is to boot from AEC The system will detect a new device and require a directory Acard AEC-6896/S access. Follow the wizard.

Acard AEC-6896/S Drivers Mac

Figure 5. Figure 7.

Acard AEC-6896/S drivers

Follow the directions. The system will complete the setup automatically.

Figure 9. Figure Windows logo is a mechanism designed to prevent OS from working abnormally because of installing unidentified software.

Related Posts